Multiple State Setting - Omron NB Series Operation Manual

Read Address: Refers to the bit address controlling the displayed information (such as the
Write Address: Refers to the bit address of On/Off state controlled by the switch.
Address: Refers to the Read/Write Address corresponding to the switch.
2
Switch to the [Bit State Switch] tab and set switch type.
Types and Functions of Switch
Type
On
Off
Toggle
Reset
3
Switch to the [Tag] and add the text corresponding to the state.
4
Switch to the [Graphics] tab, and select vector graphics or bitmap to display the bit address
state and represent the touching area.
5
Switch to the [Control Setting] tab and make the Security Setting and set the Notifications.
6
Press the [OK] button to complete the setup of the Bit State Switch component.
3-6-4

Multiple State Setting

Multiple State Setting component also defines a touching area and the state value will be
input into the specified word address when the area is enabled.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
statue, graphics, tag and so on) of the switch.
The specified bit address will turn On when the component is pressed. The state
remains even if the component is released.
The specified bit address will turn Off when the component is pressed. The state
remains even if the component is released.
The state of the specified bit address will change once (On Off On) when the
component is pressed each time.
The specified bit address state will turn On or Off when the component is pressed or
released respectively.
3 Functions of NB-Designer
Descriptions
3
3-87