Chapter 6
Cajun Campus CLI - Layer 3
Example:
set system contact "Gabby ext.545"
set system name Command
The syntax for this command is:
set system name [name string]
Example:
Router-N> set system name "Banking System"
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
set system location Command
The syntax for this command is:
set system location [location string]
Example:
Router-N> set system location "Floor 5,Room 12"
copy tftp startup-config Command
Use the copy tftp startup-config command to copy the P333R-LB
configuration from the saved TFTP file to the Startup Configuration NVRAM.
The syntax for this command is:
copy tftp startup-config <filename> <ip>
filename
ip
Example:
copy tftp startup-config
192.168.49.10
144
file name (full path)
The ip address of the host
c:\P333R-LB\router1.cfg
Avaya P333R-LB User's Guide