Chapter 6
Cajun Campus CLI - Layer 3
ip icmp-errors Command
Use the ip icmp-errors command to set ICMP error messages ON. The no
form of this command to set ICMP error messages OFF.
The syntax for this command is:
[no] ip icmp-errors
ip unicast route-cache aging Command
Use the ip unicast route-cache aging command to enable aging of unicast
cache entries.
Use the no form of this command to disable aging. The default is enable.
The syntax for this command is:
[no] ip unicast route-cache aging
ip unicast route-cache update-timeout Command
Use the ip unicast route-cache update-timeout command to configure
the timeout used to remove inactive cache entries.
Use the no form of this command to return to the default value.
The syntax for this command is:
[no] ip unicast route-cache update-timeout interval - seconds
Output Example:
Router-N(configure)# ip unicast route-cache update-timeout 600
Done!
164
Avaya P333R-LB User's Guide