Set Port Auto-Negotiation-Flowcontrol-Advertisement Command - Avaya P333R-LB User Manual

Example:
These examples show how to use the set port flowcontrol command set:
P330-N# set flowcontrol receive 1/51 on
Port 1/51 flow control receive administration status set to on
(port will require far end to send flowcontrol)
P330-N# set flowcontrol send 1/51 off
Port 1/51 flow control send administration status set to off
(port will send flowcontrol to far end)
P330-N# set flowcontrol all 1/17 proprietary
Port 1/17 flow control administration status set to
proprietary

Set port auto-negotiation-flowcontrol-advertisement Command

The set port auto-negotiation-flowcontrol-advertisement command
sets the flowcontrol advertisement for a Gigabit port when performing
autonegotiation.
The syntax for this command is:
set port auto-negotiation-flowcontrol-advertisement <mod_num>/
<port_num> {no-flowcontrol|asym-tx-only|sym-only|sym-and-asym-rx}
no-flowcontrol
asym-tx-only
sym-only
sym-and-asym-rx
Example:
P330-N#
1/51 asym-tx-only
P330-N# Port 1/51 pause capabilities was set
Avaya P333R-LB User's Guide
The port will advertise no pause capabilities
The port will advertise asymmetric Tx pause capabilities only
The port will advertise symmetric pause capabilites only
The port will advertise both symmetric and asymmetric Rx
pause capabilites
set port auto-negotiation-flowcontrol-advertisement
Chapter 5 Cajun Campus CLI – Layer 2
115