Dir Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2
Note: When the stack master is the P332G-ML or P332GT-ML, if this command is to
be implemented on a module in the stack, a session should be opened to the
relevant module.

Dir Command

The dir command is used to show the file types that have been downloaded to the
module.
The syntax for this command is:
dir [mod_num]
Example:
P330-N> dir
M# file
-- ----
1 Booter_Image
1 module-config
1 stack-config
1 EW_Archive
2 Booter_Image
2 module-config
2 EW_Archive
Output Fields:
Field
M#
file
ver num
82
ver num file type
-------- ----------
3.5.17 SW BootImage
N/A Running Conf
N/A Running Conf
N/A SW Web Image
3.2.5 SW BootImage
N/A Running Conf
N/A SW Web Image
Description
The module number
There are several files loaded into modules memory:
• module-config – file which contains the configuration
settings made to this module.
• stack-config – file which contains the configuration settings
made at the stack level (for example IP address of the stack)
• EW_Archive – file which contains the Device Manager
(Embedded Web) software.
S/W Version number – relevant only for the Device
Management S/W
file location file description
------------- ----------------
Nv-Ram Booter Image
Ram Module Configuration
Ram Stack Configuration
Nv-Ram Web Download
Nv-Ram Booter Image
Ram Module Configuration
Nv-Ram Web Download
Avaya P333R-LB User's Guide