Chapter 5
Cajun Campus CLI – Layer 2
Supervisor Level Commands
This level includes all the commands of the User and Privileged Levels (including
all show and set commands)
Username Command
Use the username command to add a local user account. You can only do this
from within the Supervisor Level.
The syntax for this command is:
username <name> password <passwd>[access-type{read-only|read-
write|admin}]
name
passwd
access-type
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
No username Command
Use the no username command to remove a local user account.
The syntax for this command is:
no username <name>
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
136
New user name
User's password
Access type definition - read only, read-write or
administrator.
Avaya P333R-LB User's Guide