Show Module Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2
Port 1/4
Port 1/5
Port 2/1
etc.

Show module Command

Use the show module command to display module status and information. For
each module with an expansion sub-module installed, both module and sub-
module type and information are shown.
The syntax for this command is:
show module [<mod_num>]
mod_num
Example:
P330-N> show module
Mod
--- ------------------
1 P332GT-ML
P330MLSTK
BUPS
2
X330GT2
P330STK
BUPS
64
advertises no flow control capabilities.
advertises no flow control capabilities.
does not support this feature.
(Optional) Number of the module. If you do not specify a
number, all modules are shown.
Type C/S
----
0.0
1.0
1.0 4144162
2.0
2.0
S/N Statuses
-------- ----------------------------
1234567 PS:Ok Fans:Fail Mode:Layer2
Conn-Up:Ok Conn-Down:Fail
BUPS:Not Prsnt Fans:None Type:None
PS:OK Fans:OK Mode:Layer2
Conn-Up:Fail Conn-Down:Ok
BUPS:Not Prsnt Fans:None Type:None
Avaya P333R-LB User's Guide