Rmon History Command - Avaya P333R-LB User Manual

Rmon history Command

Use the rmon history command to create an RMON history entry.
The syntax for this command is:
rmon history <history index> [<module>[</port>]] interval
<interval> buckets <number of buckets> owner <owner name>
history_index
module/port
interval
number of
buckets
owner name
Example:
P330-N# rmon history 1026 1026 3/2 30 buckets 20 owner amir
history 1026 was created successfully
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Avaya P333R-LB User's Guide
This is the history index number of this entry (it is advisable to
use the same interface number as your history index number)
The module/port number
The interval between 2 samples
The number of buckets defined
Owner name string
Chapter 5 Cajun Campus CLI – Layer 2
127