No Rmon Event Command; Hostname Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2

No rmon event Command

Use the no rmon event command to delete an existing RMON event entry.
The syntax for this command is:
no rmon event <Event Index>

Hostname Command

Use the hostname command to change the Command Line Interface (CLI)
prompt. The current module number always appears at the end of the prompt.
The syntax for this command is:
hostname [<hostname_string>]
hostname_string
Note: If this command is to be implemented on a module other than the stack
master, a session should be opened to the relevant module.
86
none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).
Avaya P333R-LB User's Guide