Chapter 2 P333R-Lb Front And Rear Panels; P333R-Lb Front Panel; Figure 2.1 P333R-Lb Front Panel; Figure 2.2 P333R-Lb Led - Avaya P333R-LB User Manual

Chapter 2
P333R-LB Front and Rear Panels

P333R-LB Front Panel

The P333R-LB front panel contains LEDs, controls, connectors and an expansion
sub-module slot, as well as a console connector. The status LEDs and control
buttons provide at-a-glance information.
The front panel LEDs consist of Port LEDs and Function LEDs. The Port LEDs
display information for each port according to the illuminated function LED. The
function is selected by pressing the left or right button until the desired parameter
LED is illuminated. For example, if the COL LED is illuminated, then all Port LEDs
show the collision status of their respective port. If you want to select the LAG
function, press the right button until the LAG Function LED is lit. If you then want
to select Rx, press the left button several times until the Rx function LED lights.
P333R-LB front panel shown below includes the P333R-LB LEDs, buttons, the
Expansion sub-module slot, and the RJ-45 console connector at the bottom right
(refer to Figure 2.1 and Figure 2.2). The LEDs are described in Table 2.1.
Figure 2.1
Figure 2.2
EXPANSION
SLOT
Left/Right
and Reset (both)
Switches
Avaya P333R-LB User's Guide
P333R-LB Front Panel
P333R-LB LED
Port LEDs
51 52 53 54 55 56 57 58
1
59 60 61 62 63 64 65 66
13
LNK COL Tx
FIV
FIV Switch Function LEDs
5 7
2 3 4 6 8 9 10 11
14 15 16 17 18 19 20 21 22 23
Rx FDX FC Hspd LAG LB ROUT SYS OPR
12
24
PWR
21