Set Port Spantree Cost Command; Set Port Security Command; Set Cascading Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2

Set port spantree cost Command

Use the set port spantree cost to set the cost of a port. This value defines
which port will be allowed to forward traffic if two ports with different costs cause a
loop.
The syntax for this command is:
set port spantree cost [module/port] [value]
module/port
value
Example:
P330-N(super)# set port spantree cost 1/4 1000
P330-N(super)#

Set port security Command

Use the set port security command to enable MAC security on a port, a range
of ports, a module, or a stack.
The syntax for this command is:
set port security { enable | disable } [<module>[/<port>]]
{ enable | disable } - set the port security enable or disable
[<module>[/<port>]] - set specific module/port
Example:
P330-N> set port security enable 1/22
Port 1/22 secured.

Set cascading Command

Use the set cascading command to enable or disable fault-trap sending for
unconnected cascading links.
The syntax for this command is:
set cascading{up|down}fault-monitoring {enable|disable}<mod-num>
112
The module/port number
The number representing the cost of the port. The
cost level is set from 1 to 65535. A lower cost (lower
value) specifies precedence of a port to forward
traffic.
Avaya P333R-LB User's Guide