Show Secure Mac Port Command; Show Security Mode Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2
# Module
-------
1 No IPMc SupportNot Installed

Show secure mac port Command

Use the show secure mac port command to display the secure MAC addresses
of a port from the sub-agent CLI.
The syntax for this command is:
show secure mac port <mod-num>/<port-num>
Note: When the stack master is the P332G-ML or P332GT-ML, if this command is to
be implemented on a module in the stack, a session should be opened to the
relevant module.
Example:
P330-N> show secure mac port 1
Port
------
1/17

Show security mode Command

Use the show security mode command to display the status of the MAC
security feature.
The syntax for this command is:
show security mode
Example:
P330-N> show security mode
Security mode enabled.
80
Sub-Module
----------
Secure-Src-Addrs
-----------------
00-50-04-07-6a-fa
01-02-03-04-05-06
Cascade
--------
No IPMc Support
Avaya P333R-LB User's Guide