Configuring The Switch; P333R-Lb Default Settings; Table 3.1 Default Switch Settings - Avaya P333R-LB User Manual

Chapter 3 Installation and Setup

Configuring the Switch

The P333R-LB may be configured using the text-based CLI, the P330 Embedded
Web Manager or CajunView.
For instructions on the text-based utility, refer to Chapter 4, Cajun Campus CLI –
Architecture, Access & Conventions.
For instructions on installation of the Graphical User Interfaces (GUI), refer to
Appendix A, Embedded Web Manager. For instructions on the use of the graphical
user interfaces, refer to the Device Manager User's Guide and the Load Balancing
Manager User's Guide on the Management CD.

P333R-LB Default Settings

The default settings for the P333R-LB switch and its ports are determined by the
P333R-LB software. These default settings are subject to change in newer versions of
the P333R-LB software.
Table 3.1
Function
IP Address
Default gateway
VLANs
Spanning tree
Bridge priority for Spanning
Tree
Time server IP address
Timezone offset
Read-only SNMP community
string
Read-write SNMP community
string
Trap SNMP community string
SNMP retries number
SNMP timeout
SNMP authentication trap
32
Default Switch Settings
Default Setting
149.49.35.214
0.0.0.0
VLAN 1
Enabled
32768
0.0.0.0
0 hours
Public
Public
Public
3
2000 Seconds
Disabled
Avaya P333R-LB User's Guide