Rmon Event Command; Copy Stack-Config Tftp Command - Avaya P333R-LB User Manual

Rmon event Command

Use the rmon event command to create an RMON event entry.
The syntax for this command is:
rmon event <Event Number> <type> description <description>
owner <owner>
event number
type
description
owner
Example:
P330-N#
monitoring amir's computer" owner amir
event 1054 was created successfully

Copy stack-config tftp Command

Use the copy stack-config tftp command to upload the stack-level
parameters from the current NVRAM running configuration into a file via TFTP.
Note: Create the file into which you wish to upload the stack-level parameters prior
to executing this command.
The syntax for this command is:
copy stack-config tftp <filename> <ip>
filename
ip
Example:
P330-N# copy stack-config tftp c:\conf.cfg 192.168.49.10
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'upload status' command
Avaya P333R-LB User's Guide
This is the event index number of this entry.
The type of the event. The possible parameters are:
trap, log, logAndTrap, none.
A user description of this event
Owner name string
rmon event 1054 logAndTrap description "event for
file name (full path)
The ip address of the TFTP server
Chapter 5 Cajun Campus CLI – Layer 2
129