Chapter 6
Cajun Campus CLI - Layer 3
Table 6.1
event set
User /Privileged Command Mode
hostname Command
Use the hostname command to change the system prompt used for the router.
This command does not change the system prompt of the stack. To change the
system prompt of the stack, use the host name command in the switch CLI tree.
The syntax for this command is:
[no] hostname [<hostname_string>]
hostname_string
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
show copy status Command
Use the show copy status command to show the status of the local
configuration copy operation.
The syntax for this command is:
show copy status
show tftp-download status Command
Use the show tftp-download status command to view the status of the tftp
download operation.
The syntax for this command is:
show tftp-download status
142
System Commands
none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).
148
Avaya P333R-LB User's Guide