Table of Contents
Advertisement
Example:
These examples show how to use the set port flowcontrol command set:
P130-1# set flowcontrol receive 5/1 on
Port 5/1 flow control receive administration status set to on
(port will require far end to send flowcontrol)
P130-1#
P130-1# set flowcontrol send 5/1 off
Port 5/1 flow control send administration status set to off
(port will send flowcontrol to far end)
P130-1#
Set port auto-negotiation-flowcontrol-advertisement Command
Use the set auto-negotiation-flowcontrol-advertisement command to
set the flowcontrol advertisement for a Gigabit port when performing
autonegotiation.
The syntax for this command is:
set port auto-negotiation-flowcontrol-advertisement
<mod_num>/<port_num> {no-flowcontrol | asym-tx-only | sym-only
| sym-and-asym-rx}
mod_num
port_num
no-flowcontrol
asym-tx-only
sym-only
sym-and-
asym-rx
Example:
P130-1# set port auto-negotiation-flowcontrol-advertisement
1/51 asym-tx-only
Port 1/51 pause capabilities was set
Avaya P130 User's Guide
Module number
Number of the port on the module
The port will advertise no pause capabilities
The port will advertise asymmetric Tx pause capabilities only
The port will advertise symmetric pause capabilities only
The port will advertise both symmetric and asymmetric Rx
pause capabilities.
Chapter 6
Avaya P130 CLI
75
Advertisement
Table of Contents
