Ap Intrusion Detection; Enabling And Configuring Ap Detection - Motorola RFS Series Reference Manual

6.2 AP Intrusion Detection

Use the Access Point Detection
The Access Point Detection screen consists of the following tabs:
•

Enabling and Configuring AP Detection

• Approved APs
• Unapproved APs (AP Reported)
• Unapproved APs (MU Reported)
• AP Containment
6.2.1 Enabling and Configuring AP Detection
Use the Configuration
of detected APs allowed and define the timeout and threshold values used for detection. The switch can
enable both Access Ports and MUs to scan and detect Access Points within the switch managed network.
Continually re-validating the credentials of associated devices reduces the possibility of an Access Point
hacking into the switch managed network.
To configure AP Detection:
1. Select Security
2. Select the Configuration
menu options to view and configure the detection of other Access Points.
screen to allow the switch to detect potentially hostile Access Points, set the number
> Access Port Intrusion Detection
tab.
from the main menu.
6-3
Switch Security