Motorola RFS Series Reference Manual page 38

2-2 Motorola RF Switch System Reference
To display the switch Web UI:
1. Point the browser to the IP address assigned to the wired Ethernet port (port 2). Specify a secure
connection using the https:// protocol.
The switch login screen displays:
2. Enter the Username admin, and Password superuser. Both are case-sensitive. Click the
NOTE: If using HTTP to login into the switch, you may encounter a Warning screen if a
self-signed certificate has not been created and implemented for the switch. This warning
screen will continue to display on future login attempts until a self-signed certificate is
implemented. Motorola recommends only using the default certificate for the first few
login attempts until a self-signed certificate can be generated.
NOTE: If your password is lost, there is a means to access the switch, but you are forced
to revert the switch back to its factory default settings and lose your existing
configuration (unless saved to a secure location). Consequently, Motorola recommends
keeping the password in a secure location so it can be retrieved. For information on
password recovery, see
Once the Web UI is accessed, the Switch main menu item displays a configuration tab with high-level
switch information. Click the
Once the switch is fully configured, the dashboard is the central display for the user to view the version
of firmware running on the switch, quickly assess the last 5 alarms generated by the switch, view the
status of the switch's Ethernet connections and view switch CPU and memory utilization statistics.
NOTE: The chapters within this System Reference Guide are arranged to be
complimentary with the main menu items in the menu tree of the switch Web UI. Refer to
this content to configure switch network addressing, security and diagnostics as required.
Switch Password Recovery on page
Show Dashboard button to display an overall indicator of switch health.
Login button.
2-2.