Configuring Ip Forwarding - Motorola RFS Series Reference Manual
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
4-6 Motorola RF Switch System Reference Guide
6. Click
Cancel
4.2.2 Configuring IP Forwarding
The IP Forwarding table lists all the routing entries to route the packets to a specific destination. To view the
IP forwarding configuration:
1. Select
Network
2. Select the
IP Forwarding
Use the Filtering Option to view the details displayed in the table.
3. The read-only
routing between VLANs, use the
The following details display in the table:
Destination Subnet
Subnet Mask
Gateway Address
Interface
to close the dialog without committing updates to the running configuration.
>
Internet Protocol
from the main tree menu.
tab.
IP Forwarding
tab displays the current status between VLANs. To toggle the status of
Enable/Disable
Displays the mask used for destination subnet entries. The Subnet Mask is the IP
mask used to divide internet addresses into blocks (known as subnets). A value of
255.255.255.0 will support 256 IP addresses.
Displays the mask used for destination subnet entries. The Subnet Mask is the IP
mask used to divide internet addresses into blocks (known as subnets). A value of
255.255.255.0 will support 256 IP addresses.
Displays the IP address of the Gateway used to route the packets to the specified
destination subnet. Do not set the gateway address to any VLAN interface used
by the switch.
Displays the interface name with which the destination subnet entries are
attached.
options located at the bottom of the screen.
Advertisement
Table of Contents
