Motorola RFS Series Reference Manual page 103

3. Click on the Add
4. Enter the VLAN ID
5. Provide a Description
managed network.
6. The Primary IP Settings
a. Select Use DHCP to obtain IP Address automatically
for the virtual interface. Selecting this option disables the IP address field.
b. Enter the
c. Enter the
7. Select the Set as Management Interface
configure the switch.
8. Use the Secondary IP Addresses
The address provided in this field is used if the primary IP address is unreachable.
Select the Add
sub screen. Choose an existing secondary address and select
secondary address.
9. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel
4.4.1.2 Modifying a Virtual Interface
To modify an existing virtual interface.
CAUTION: When changing from a default DHCP address to a fixed IP address, set a static
route first. This is critical when the switch is being accessed from a subnet not directly
connected to the switch and the default route was set from DHCP.
1. Select Network
button.
for the switch virtual interface.
for the VLAN, representative of the VLAN's intended operation within the switch
field consists of the following:
IP Address for the VLAN associated virtual interface.
Subnet Mask for the IP address.
field to define additional IP addresses to associate with VLAN IDs.
button (within the Secondary IP Addresses field) to define additional addresses from a
field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
> Switch Virtual Interface
to allow DHCP to provide the IP address
checkbox to enable any host displayed in this VLAN to
Edit or Delete
from the main tree menu.
4-15
Network Setup
to revise or remove a