Motorola RFS Series Reference Manual page 225
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
2. Click the
Secure WiSPe
3. Enter a
Default Pre-Shared Secret
between 1 and 64 characters.
4. The
Secure WiSPe Table
Switch
The
Switch
each AP. When clustering is enabled on the switch and Cluster GUI is enabled the
Switch
configuring enabling Cluster GUI, see
MAC Address
Displays the MAC Addresses for each of the Access Ports.
AP Type
The AP Type displays the Access Port model (AP100, AP300, AP-5131 or AP-7131).
Secure Mode
Indicates if Secure Mode is enabled for each of the listed Access Ports. A green
Enabled
checkmark indicates Secure Mode is enabled and a red X indicates that Secure
Mode is disabled.
Pre-Staging Enabled
Indicates if Pre-Staging Mode is enabled for each of the listed Access Ports. A
green checkmark indicates Pre-Staging is enabled and a red X indicates that Pre-
Staging is disabled.
5. To edit the Secure WiSPe settings for an AP, select an AP from the
Edit
button.
6. To enable Secure Mode click the
The AP's MAC Address and mode will be saved in the running configuration. If secure-mode is set to
enable, it means that WISP-e transactions for this AP will be secured.
7. To disable Secure Mode click the
The AP's MAC Address and mode will be saved in the running configuration. If secure-mode is set to
disable, it means that WISP-e transactions for this AP will not be secured.
8. When using clustering and the
select which cluster members' APs are displayed. To view APs from all cluster members, select
tab.
used for Secure WiSPe authentication. The shared secret must be
displays the following information on each configured AP:
field displays the IP address of the cluster member associated with
field will be available on the AP configuration screen. For information on
Enable Secure Mode
Disable Secure Mode
Cluster GUI
feature is enabled, a pulldown menu will be availble to
Managing Clustering Using the Web
Secure WiSPe Table
button to enable secure-mode to a set of APs.
button to disable secure-mode to a set of APs.
4-137
Network Setup
UI.
and click the
All
from
Advertisement
Table of Contents
