Debugging The Applet - Motorola RFS Series Reference Manual

8-18 Motorola RF Switch System Reference Guide

8.5 Debugging the Applet

Refer to the Applet Debugging
system events by a criticality level you define.
1. Select Diagnostics
2. To use this window, select the
The Applet Debugging field is partitioned into the following editable fields:
• Send log message to a file.
• Use SNMP v2 only.
• Message Severity.
• What kinds of message should be seen.
3. Select the Send log message to a file
Enabling this checkbox allows you to select the file location where you wish to store the log message.
4. Select the Use SNMP V2 only
Check whether you have access to SNMP v2 by clicking on the
v2 access is available, the test icon will change from grey to green, indicating the SNMPv2 interface is
viable on the switch.
5. Select the severity of the message you wish to store in the log file.
The Message Severity
• Fatal - loss of data or switch functionality
• Error - switch data compilation problem, could result in data loss
• Warning - potential data loss of configuration corruption
• Informational - data that may be useful in assessing a potential error
• Debug - information relevant to troubleshooting
screen to debug the applet. This screen allows you to view and debug
> Applet Debugging from the main menu.
Enable Web-UI Debug Mode
checkbox if you wish to store the log message.
checkbox to use SNMP v2 to debug the applet.
section allows you to report a bug and log it as per the following severity levels:
checkbox.
Test SNMP V2 access button. If SNMP