Motorola RFS Series Reference Manual page 223
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
2. Click the
Unadopted AP
The
Unadopted AP
tab displays the following information:
Index
Displays a numerical identifier used to associate a particular Access Port with a
set of statistics and can help differentiate the Access Port from other Access Ports
with similar attributes.
MAC Address
Displays the unique Hardware or Media Access Control (MAC) address for the
Access Port. Access ports with dual radios will have a unique MAC address for
each radio. The MAC address is hard coded at the factory and cannot be modified.
Last Seen (In
Displays the time the Access Port was last seen (observed within the switch
Seconds)
managed network). This value is expressed in seconds. Use this value to assess if
the Access Port is no longer in communications with the switch.
Number of
Displays the total number of Access Ports (at the bottom of the screen) that have
Unadopted APs
been recognized, but not adopted by the switch.
3. Select an available index and click the
radio can be added for adoption to the switch. When displayed, the screen prompts for the MAC address
and type of radio. Complete the fields and click the
4. Click the
Export
button to export the contents of the table to a Comma Separated Values file (CSV).
CAUTION: An Access Port is required to have a DHCP provided IP address before
attempting layer 3 adoption, otherwise it will not work. Additionally, the Access Port must
be able to find the IP addresses of the switches on the network. To locate switch IP
addresses on the network:
• Configure DHCP option 189 to specify each switch IP address.
• Configure a DNS Server to resolve an existing name into the IP of the switch. The Access
Port has to get DNS server information as part of its DHCP information. The default DNS
name requested by an AP300 is "Symbol-CAPWAP-Address". However, since the default
name is configurable, it can be set as a factory default to whatever value is needed.
tab.
Adopt
button to display a screen wherein the properties of a new
OK
button to add the radio.
4-135
Network Setup
Advertisement
Table of Contents
