Configuring Adaptive Ap Firmware - Motorola RFS Series Reference Manual

4-138 Motorola RF Switch System Reference Guide
the pulldown menu. To view APs radios from a specific cluster member, select that member's IP address
from the pulldown menu.

4.9.5 Configuring Adaptive AP Firmware

Refer to the AP Firmware
each adopted Access Port or Adaptive AP. The screen allows you to update the firmware image for Adaptive
APs that associate with the switch.
To view AP firmware information:
1. Select Network
2. Click the AP Firmware
1. Enable or disable Adaptive AP Automatic Update (AAP Automatic Update).
AAP Automatic
Update
tab to view the Access Port and Adaptive AP firmware image associated with
> Access Port from the main menu tree.
tab.
Check this box to enable automatic updates of Access Port or Adaptive AP
firmware when an Access Port or Adaptive AP associates with the switch. The AP
image file used for automatic update are specified in the
Table below.
AP Image Upload