Motorola RFS Series Reference Manual page 66

3-22 Motorola RF Switch System Reference
2. Select the PoE
SWITCH NOTE: The PoE screen is only available on the RF6000 switch. The WS5100
and RFS7000 switches do not have Power over Ethernet on any ports and will not display
the PoE tab.
The PoE Global Configuration
Power Budget
Power Consumption
Power Usage
Threshold for
Sending Trap
If you have modified the
changes.
Port
PoE
Class
tab
section displays the following power information.
Displays the total watts available for Power over Ethernet on the switch.
Displays the total watts in use by Power over Ethernet on the switch.
Specify a percentage of power usage as the threshold before the switch sends an
SNMP trap. The percentage is a percentage of the total power budget of the
switch.
Power Usage Threshold for Sending Trap
Displays the port name for each of the PoE capable ports.
Displays the PoE status of each PoE capable port. Status will display Up when PoE
is available on the port and Down when PoE is unavailable on the port.
Displays the IEEE Power Classification for each port:
Class Number
0 (unknown)
1
2
3
value, click the
Maximum Power Required from Switch
15.4 Watts
4 Watts
7 Watts
15.4 Watts
Apply button to save the