Accessing Snmp V2/V3 Statistics - Motorola RFS Series Reference Manual

7. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
8. Click Cancel to close the dialog without committing updates to the running configuration.

7.3.3 Accessing SNMP v2/v3 Statistics

Refer to the Statistics
screen also displays Usm Statistics (SNMP V3 specific events specific to the User-based Security Model) and
their values.
To edit an SNMP v3 user profile:
1. Select Management Access
2. Select the Statistics
3. Refer to the following read-only statistics displayed within the SNMP Access Statistics screen:
V2/V3 Metrics
Values
field for the current state of the requests made from applet. This field displays error
screen for a read-only overview of SNMP V2/V3 events and their current values. The
> SNMP Access
tab from within the SNMP Access screen.
Displays the individual SNMP Access events capable of having a value tracked for
them. The metrics range from general SNMP events (such as the number of SNMP
packets in and out) to specific error types that can be used for troubleshooting
SNMP events (such as Bad Value and Read-Only errors).
Displays the current numerical value for the SNMP V2/V3 Metric described on the
left-hand side of the screen. The value equals the number of times the target event
has occurred. This data is helpful in troubleshooting SNMP related problems within
the network.
from the main menu tree.
7-9
Switch Management