Unapproved Aps (Mu Reported) - Motorola RFS Series Reference Manual

6.2.4 Unapproved APs (MU Reported)

Use the Unapproved APs (MU Reported)
MUs. The criteria for Access Point approval was defined using the
Detection > Configuration
unapproved Access Points detected by switch radio associated MUs:
1. Select Security
2. Click on the Unapproved APs (MU Reported)
3. The Unapproved APs (MU Reported)
BSS MAC Address
Reporting MU
Last Seen (In
Seconds)
ESSID
4. The Number of Unapproved APs
detected.
5. Click the Export
tab to review unapproved Access Points detected by associated
screen, using the values defined within the
> Access Port Intrusion Detection
table displays the following information:
Displays the MAC Address of each Unapproved AP. These MAC addresses are
Access Points observed on the network (by associated MUs), but have yet to be
added to the list of approved APs, and are therefore interpreted as a threat on the
network.
Displays the numerical value for the detecting MU.
Displays the time (in seconds) the Unapproved AP was last seen on the network
by the detecting MU. Use this interval to determine whether the detected MU is
still a viable threat.
Displays the ESSID of each Unapproved AP. These ESSIDs are device ESSIDs
observed on the network, but have yet to be added to the list of Approved APs and
are therefore interpreted as a threat.
is simply the sum of all of Unapproved Radio MAC Addresses
button to export the contents of the table to a Comma Separated Values file (CSV).
Security > Access Port Intrusion
MU Assisted Scan
from the main menu tree.
tab.
6-9
Switch Security
field.To view