Motorola RFS Series Reference Manual page 41

• image file URL
• expected image version
To set default to no, and the URLs and the version default to "" (blank):
RF Switch(config)#show autoinstall
feature enabled
config no
cluster cfg no
image no
expected image version
Enables are set using the autoinstall <feature>
RF Switch>en
RF Switch#conf t
RF Switch(config)#autoinstall image
RF Switch(config)#autoinstall config
RF Switch(config)#autoinstall cluster-config
After this configuration update, any switch reboot with DHCP enabled on the RON port will trigger an auto
install, provided the DHCP Server is configured with appropriate options.
The "enables" are cleared using the
URLs and the version string are stored in the configuration file as text and can be cleared using an empty
pair of double quotes to denote the blank string. In the following example, define the three URLs and the
expected version of the image file, then enable all three features for the auto install.
RF Switch(config)#autoinstall config url ftp://ftp:ftp@192.9.200.1/RFSwitch/
config
RF Switch(config)#autoinstall cluster-config url ftp://ftp:ftp@192.9.200.1/
RFSwitch/cluster-config
RF Switch(config)#autoinstall image url ftp://ftp:ftp@147.11.1.11/RFSwitch/
images/WS5100.img
RF Switch(config)#autoinstall image version
RF Switch(config)#autoinstall config
RF Switch(config)#autoinstall cluster-config
RF Switch(config)#autoinstall image
RF Switch(config)#show autoinstall
feature enabled
config yes
cluster cfg yes
image yes
expected image version
Once again, for DHCP option based auto install the URLs is ignored and those passed by DHCP are not stored.
Whenever a string is blank it is shown as --not-set--.
URL
--not-set--
--not-set--
--not-set--
--not-set--
command:
no autoinstall <feature>
URL
ftp://ftp:ftp@192.9.200.1/RFSwitch/config
ftp://ftp:ftp@192.9.200.1/RFSwitch/cluster-config
ftp://ftp:ftp@147.11.1.11/RFSwitch/images/WS5100.img
3.1.0.0
-XXXXX
Switch Web UI Access and Image Upgrades
3.1.0.0
-XXXXX