Configuring Mobile Units - Motorola RFS Series Reference Manual

Voice
WMM
Roam Count
5. Click the Refresh
6. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.

4.6.2 Configuring Mobile Units

The Mobile Units Configuration screen lets you view MAC Address to MAC Name associations as well as
creating new MAC Address to MAC Name associations.
To configure Mobile Unit settings:
1. Select Network
2. Click the Configuration
3. The MU table displays the following information:
Switch
Station Index
Displays whether or not the MU is a voice capable device. Traffic from a voice
enabled MU is handled differently than traffic from MUs without this capability.
MUs grouped to particular WLANs can be prioritized to transmit and receive voice
traffic over data traffic.
Displays WMM usage status for the MU, including the Access Category currently
in use. Use this information to assess whether the MU is using the correct WMM
settings in relation to the operation of the switch.
Refer to the Roam Count value to assess the number of times the MU has roamed
from the switch.
button to update the MU Statistics to their latest values.
field for the current state of the requests made from applet. This field displays error
> Mobile Units from the main menu tree.
tab.
The Switch field displays the IP address of the cluster member associated with
each MU. When clustering is enabled on the switch and Cluster GUI is enabled the
Switch field will be available on the MU Configuration screen. For information on
configuring enabling Cluster GUI, see Managing Clustering Using the Applet.
The Station Index is a numerical device recognition identifier for a specific MU.
4-79
Network Setup