Configuring Access Point Radio Bandwidth - Motorola RFS Series Reference Manual

8. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel to close the dialog without committing updates to the running configuration.

4.7.5 Configuring Access Point Radio Bandwidth

Refer to the Bandwidth
The weight represents the switch priority assigned to the traffic transmitted from the radio for the WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation within its
assigned WLAN, see
To view existing radio bandwidth weight settings:
1. Select Network
2. Click the Bandwidth
Bandwidth information displays per radio with the following data:
Index
Description
QoS Weight
field for the current state of the requests made from applet. This field displays error
tab to view the QoS weight associated with each radio when added to a WLAN.
Editing the WLAN Configuration on page
> Access Port Radios from the main menu tree.
tab.
The Index is the numerical index (device identifier) used with the device radio. Use
this index (along with the radio name) to differentiate the radio from other device
radios.
The displayed name is the name used with the device radio. Use this name (along
with the radio index) to differentiate the radio from other device radios.
Displays the Quality of Service weight for the AP. The default value for the weight
is 1. AP QoS will be applied based on the QoS weight value with the higher values
given priority.
Network Setup
4-25.
4-105