Motorola RFS Series Reference Manual page 71
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
1. Click the
Transfer Files
2. Refer to the
Source
field to define the location and address information for the source config file.
From
Select the location representing the source file's current location using the
drop-down menu. Options include
File
Specify a source file for the file transfer. If the switch is selected, the file used at
startup automatically displays within the File parameter.
Using
Refer to the
conducted using FTP or TFTP. FTP transfers require a valid user ID and password.
IP Address
Enter the
Ensure the IP address is valid or risk jeopardizing the success of the file transfer.
User ID
Enter the
server.
Password
Enter the
Path
Specify an appropriate
or server. The Target options are different depending on the target selected.
3. Refer to the
Target
field to specify the details of the target file.
To
Use the
Options include the switch (default location), external server or local disk.
File
Use the
icon to search attached files systems for target file location.
4. Refer to the
Status
field for the current state of the requests made from the applet. Requests are any
"SET/GET" operation from the applet. The Status field displays error messages if something goes wrong
in the transaction between the applet and the switch.
5. Click the
Transfer
button when ready to move the target file to the specified location. Repeat the process
as necessary to move each desired configuration file to the specified location.
6. Click the
Abort
button to cancel the file transfer process before it is complete.
7. Click the
Close
button to exit the Transfer screen and return to the Config Files screen. Once a file is
transferred, there is nothing else to be saved within the Transfer screen.
button on the bottom of the Configuration screen.
Server, Local Disk
Using
drop down-menu to configure whether the log file transfer is
IP Address
of the server or system receiving the source configuration.
User ID
credentials required to transfer the configuration file from a FTP
Password
required to send the configuration file from an FTP server.
Path
name to the target directory on the local system disk
To
drop-down menu to define the location of the configuration file.
File
field to specify a target file for the file transfer. Use the File Browser
Switch Information
From
and Switch.
3-27
Advertisement
Table of Contents
