Configuring Excluded Ip Address Information - Motorola RFS Series Reference Manual

Hardware Address
Client Name
Client ID
4. Click the Edit button to modify the properties displayed on an existing DHCP pool. For more information,
see Editing the Properties of an Existing DHCP Pool on page
5. To delete an existing DHCP pool from the list of those available, highlight the pool from within the Pool
Name field and click the
6. Click the Add button to create a new DHCP pool. For more information, see
page 5-6.
7. Click the Options
information, see
8. Click the DDNS
available pools. For more information, see

5.2.3 Configuring Excluded IP Address Information

The DHCP Server may have some IP addresses unavailable when assigning IP address ranges for a pool. If
IP addresses have been manually assigned and fixed, they need to be made available for the administrator
to exclude from possible selection.
To view excluded IP address ranges:
1. Select Services
Displays the type of interface used to pass DHCP discover and request exchanges
between the switch DHCP server and DHCP Clients. The Hardware Address field
also displays the address of the DHCP client for whom the static IP is reserved.
Displays the name of the client requesting DHCP Server support over this
interface. This name is ready only cannot be modified using the host pool edit
option.
Displays the client Identifier, based on this identifier static IP is assigned.
Hardware address and Client Identifier should not be configured on a same host
pool. A pool name cannot have both a client ID and MAC address.
Delete button.
button to insert a global pool name into the list of available pools. For more
Configuring DHCP Global Options on page
button to configure a DDNS domain and server address that can be used with the list of
Configuring DHCP Server DDNS Values on page
> DHCP Server from the main menu tree.
Switch Services
5-5.
Adding a New DHCP Pool on
5-8.
5-11
5-9.