Motorola RFS Series Reference Manual page 127

Main Logo URL The Main Logo URL is the URL for the main logo image displayed on the Failed
page when using the internal Web server. This option is only available if Internal
is chosen from the drop-down menu above.
Descriptive Text Specify any additional text containing instructions or information for the users
who access the Failed page on the internal Web server. This option is only
available if Internal is chosen from the drop-down menu above. The default text
is: Either the username and password are invalid, or service is unavailable at this
time.
7. Refer to the
Allow List
accessed by the Hotspot user without authentication.
NOTE: In multi-switch hotspot environments if a single switch's internal pages are
configured for authentication on the other switches, those switches will redirect to their
own internal pages instead. In these environments is recommended to use an external
server for all of the switches.
8. Check the Use System Name in Hotspot URL
configuration screen as part of the hotspot address.
9. Check the Logout on Browser Close
their web browsers.
10.Specify the maximum Hotspot Simultaneous Users
hotspot users for the selected WLAN.
11.Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
12.Click OK to use the changes to the running configuration and close the dialog.
13.Click Cancel to close the dialog without committing updates to the running configuration.
Configuring External Hotspot
Selecting the external option entails hosting your own external Web server using advanced Web content
(using XML, Flash). To create a hotspot maintained by an external server:
1. Select Network > Wireless LANs
2. Select an existing WLAN from those displayed within the
field, and enter any IP address (for internal or external Web sites) that may be
to use the
button to logout hotspot users from the network when they close
from the main menu tree.
System Name specified on the main Switch
to set a limit on the number of concurrent unique
Configuration tab and click the
4-39
Network Setup
Edit button.