Viewing Sensor Information; Configuring Secure Wispe - Motorola RFS Series Reference Manual

4-136 Motorola RF Switch System Reference Guide

4.9.3 Viewing Sensor Information

Use the Sensor
Access Ports.
To view existing Sensor information:
1. Select Network
2. Click the Sensor
3. Specify the global default
The Sensor Display Table
Index
MAC Address
VLAN
Last Heard(sec)
IP Address
Revert to AP

4.9.4 Configuring Secure WiSPe

To configure Secure WiSPe:
1. Select Network
tab to view information on AP300s configured as sensors and if needed revert them to
> Access Port from the main menu tree.
tab.
VLAN ID for all sensors and click the
displays the following information:
Displays the numeric value assigned to each sensor AP.
Displays the Media Access Control(MAC) address for each sensor AP.
Displays the VLAN that each sensor AP is associated with.
Displays the number of seconds since the switch last received packets from each
sensor AP.
Displays the current IP address for each sensor AP.
Select a sensor AP from the table and click the Revert to AP button to return to
convert the AP back to a standard Access Port.
> Access Port from the main menu tree.
Apply button.