Motorola RFS Series Reference Manual page 249

3. Click the Insert
be added.
4. Name the option as appropriate, assign a
options to specify a value of ip or ascii to the DHCP global option.
5. Highlight an entry from within the Global Options screen and click the
and value.
6. Click OK to save and add the changes to the running configuration and forward the updates to the other
peer switches comprising the mobility domain.
7. Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
8. Click Cancel
5.2.1.4 Configuring DHCP Server DDNS Values
The DHCP Server screen's Configuration tab can be used to display an additional
screen to define a DDNS domain name and address for use with the switch.
NOTE: For an additional (in depth) discussion on the DDNS setup options available on the
switch (using both the switch CLI and Web UI), refer to Chapter 7 of the Migration Guide
available for download from the corporate Website.
To configure a global domain name and DDNS server address:
1. Select Services
2. Highlight an existing pool name from within either the Configuration or Host Pool tabs and click the
DDNS button at the bottom of the screen.
3. Enter a Domain Name
4. Define the TTL
seconds.
button to display an editable field wherein the name and value of the DHCP option can
field.
to close the dialog without committing updates to the running configuration
> DHCP Server from the main menu tree.
which represents the forward zone in the DNS server. For example test.net.
(Time to Live) to specify the validity of DDNS records. The maximum value is 864000
Code (numerical identifier) and use the
Remove
5-9
Switch Services
Type drop-down
button to delete the name
DDNS screen. Use this