Transferring A Config File - Motorola RFS Series Reference Manual

3-26 Motorola RF Switch System Reference
Use the up and down navigation facilities on the right-hand side of the screen to view the entire page.
3. The Page parameter displays the portion of the configuration file in the main viewing area.
The total number of pages in the file are displayed to the right of the current page. The total number of
lines in the file display in the Status field at the bottom of the screen.
Scroll to corresponding pages as required to view the entire contents of the file. To navigate to a specific
page, enter the page number in the text area (next to Page item) and click on the
parameter differs depending on the source selected.
4. Refer to the
"SET/GET" operation from the applet. The Status field displays error messages if something goes wrong
in the transaction between the applet and the switch.
5. Click the Refresh
6. Click Close

3.3.2 Transferring a Config File

Transfer a configuration file to and from the switch using the
configuration is recommended to keep viable configurations available in a secure location. The following file
transfer configurations are possible:
• switch to switch, server or local disk
• server to switch
• local disk to switch
To transfer the contents of a configuration file:
Status field for the current state of the requests made from the applet. Requests are any
button to get the most recent updated version of the configuration file.
to close the dialog without committing updates to the running configuration.
Go
Transfer screen. Transferring the switch
button. The source