Motorola RFS Series Reference Manual page 339

3. Click the Add
4. Use the Precedence
The rules within an ACL will be applied to packets based on their precedence value. Rules with lower
precedence are always applied first.
NOTE: If adding an access control entry to an ACL using the switch SNMP interface,
Precedence
5. Use the Operation
action is to mark, the packet is tagged for priority.
6. Select the Logging
marked based on the criteria specified in the access lists.
7. If mark is selected from within the
enabled. Select the
with this ACL mark designation.
8. From within the
The Source Mask Length
a match based on the Network / Host.
9. Use the Source Address
10.Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
11.Click OK to use the changes to the running configuration and close the dialog.
12.Click Cancel
6.5.2.3 Editing an Existing Rule
As network and access permission requirements change, existing ACL rules need to be modified to be
relevant with new client access requests.
To modify an existing ACL rule:
button within the Associated Rules field.
field to enter a precedence (priority) value between 1 and 5000.
is a required parameter.
drop-down menu to define a permit, deny or mark designation for the ACL. If the
checkbox to generate log messages when a packet has been forwarded, denied or
Operations
802.1p (0 - 7) or TOS(0 - 255)
Filters field, select a Source Mask Length
is the size of the network or host (in mask format). The mask length defines
field to enter the IP address where the packets are sourced.
field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
drop-down menu, the Attribute to mark
checkbox and define the attribute receiving priority
from the drop-down menu.
6-25
Switch Security
field is