Motorola RFS Series Reference Manual page 147

5. Refer to the Traffic field for the following information (both received and transmitted):
Pkts per second Displays the average total packets per second that cross the selected WLAN. The
Rx column displays the average total packets per second received on the selected
WLAN. The Tx column displays the average total packets per second sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Throughput Displays the average throughput in Mbps on the selected WLAN. The Rx column
displays the average throughput in Mbps for packets received on the selected
WLAN. The Tx column displays the average throughput for packets sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected WLAN. This includes all
packets sent and received. The number in black represents this statistic for the
last 30 seconds and the number in blue represents this statistic for the last hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected WLAN that are non-
unicast. Non-unicast packets include broadcast and multicast packets. The
number in black represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
6. Refer to the RF Status
Avg MU Signal Displays the average RF signal strength in dBm for all MUs associated with the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Avg MU Noise Displays the average RF noise for all MUs associated with the selected WLAN.
The number in black represents this statistic for the last 30 seconds and the
number in blue represents this statistic for the last hour.
Avg MU SNR Displays the average Signal to Noise Ratio (SNR) for all MUs associated with the
selected WLAN. The Signal to Noise Ratio is an indication of overall RF
performance on your wireless network.
7. Refer to the Errors field for the following information:
Average Number of Displays the average number of retries for all MUs associated with the selected
Retries WLAN. The number in black represents this statistic for the last 30 seconds and
the number in blue represents this statistic for the last hour.
% Gave Up Pkts Displays the percentage of packets the switch gave up on for all MUs associated
with the selected WLAN. The number in black represents this statistic for the last
30 seconds and the number in blue represents this statistic for the last hour.
% Non-decryptable Displays the percentage of undecryptable packets for all MUs associated with the
Pkts selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
8. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel to close the dialog without committing updates to the running configuration.
field for the following information:
4-59
Network Setup