Motorola RFS Series Reference Manual page 367
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
4. Revise the following information as required to render the existing transform set useful.
Name
AH Authentication
Scheme
ESP Encryption
Scheme
ESP Authentication
Scheme
Mode
5. Refer to the
Status
messages if something goes wrong in the transaction between the applet and the switch.
6. Click
OK
to use the changes to the running configuration and close the dialog.
7. Click
Cancel
6.8.1.2 Adding a New Transform Set
A transform set represents a combination of security protocols and algorithms. During the IPSec security
association negotiation, peers agree to use a particular transform set for protecting data flow. If the
attributes of an existing transform set no longer lend themselves useful, and an existing transform set is not
required, create a new transform set to meet the needs of your network.
To edit the attributes of an existing transform set:
1. Select
Security
2. Click the
Configuration
The name is read-only and cannot be modified unless a new transform set is
created.
Select the
Use AH
checkbox (if necessary) to modify the AH Transform
Authentication scheme. Options include:
• None - No AH authentication is used.
• AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Select the
Use ESP
checkbox (if necessary) to modify the ESP Encryption Scheme.
Options include:
• None - No ESP encryption is used with the transform set.
• ESP-DES - ESP with the 56-bit DES encryption algorithm.
• ESP-3DES - ESP with 3DES, ESP with AES.
• ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
• ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
• ESP-AES 256 - ESP with 3DES, ESP with AES (256 bit key).
Select the
Use ESP
checkbox (if necessary) to modify the ESP Authentication
Scheme. Options include:
• None - No ESP authentication is used with the transform set.
• MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Modify (if necessary) the current mode used with the transform set. The mode is
either Tunnel or Transport.
field for the state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
>
IPSec VPN
from the main menu tree.
tab.
6-53
Switch Security
Advertisement
Table of Contents
