Supported Rates allow an 802.11 network to specify the data rate it supports. When a station attempts
to join the network, it checks the data rate used on the network. If a rate is selected as a basic rate it is
automatically selected as a supported rate.
4. Click the
Clear all rates
5. Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
6. Click
OK
to use the changes to the running configuration and close the dialog.
7. Click
Cancel
to close the dialog without committing updates to the running configuration.
button to uncheck all of the Basic and Supported rates.
4-127
Network Setup