Modifying The Configuration Of An Existing Ping Test - Motorola RFS Series Reference Manual

8-20 Motorola RF Switch System Reference Guide
2. Refer to the following information displayed within the Configuration tab:
Description
Destination IP
Timeout (sec)
No. of Probes
Frequency
3. To edit the properties of an existing ping test, select a ping based on the description listed and click the
Edit button. For more information, see
Modifying the Configuration of an Existing Ping Test on page
4. Select an existing ping test from those displayed within the Configure tab and click the
remove the ping test from those displayed.
5. Click the Add
information, see

8.6.1 Modifying the Configuration of an Existing Ping Test

The properties of an existing ping tests can be modified to ping an existing (known) device whose network
address attributes may have changed and require modification to connect (ping) to it.
To modify the attributes of an existing ping test:
1. Select Diagnostics
2. Highlight an existing ping test within the Configuration tab and select the
Displays the user assigned description of the ping test. The name is read-only. Use
this title to determine whether this test can be used as is or if a new ping test is
required.
Displays the IP address of the target device. This is the numeric destination for the
device sent the ping packets. If this address does not accurately reflect the ping
destination target, the ping test will not be successful.
Displays the timeout value (in seconds) used to timeout the ping test if a round trip
packet is not received from the target device.
Displays the number of packets transmitted to the target IP address to discern the
round trip time between the switch and its connected device.
Define the interval (in seconds) between ping packet transmissions. Define a
longer interval if high levels of network congestion are anticipated between the
switch and its target device. Use a value of 0 to execute a single ping test or stop
a currently executing ping test.
button to display a screen used to define the attributes of a new ping test. For more
Adding a New Ping Test on page
> Ping from the main menu.
8-20.
8-21.
Edit
Delete button to
button.