Motorola RFS Series Reference Manual page 403

If generating a new self-signed certificate (as selected in page 2 of the wizard), the wizard continues the
installation. Use the third page of the wizard to enter a unique trustpoint name and other credentials
required to create the new certificate.
3. Select the Configure the trustpoint
trustpoint
.
4. Select the Automatically generate certificate with default values
using values the switch assigns by default.
This option is recommended for generic certificates that do not represent a unique or custom switch
configuration.
5. Select the Enter certificate credentials
certificate. If you anticipate using generic (default) values, consider using the Automatically generate
certificate with default values option.
6. Provide the following information for the certificate:
Country Define the Country used in the Self-Signed Certificate. By default, the Country is
US. The field can be modified by the user to other values. This is a required field
and must not exceed 2 characters.
State Enter a State/Prov. for the state or province name used in the Self-Signed
Certificate. By default, the State/Prov. field is CA. This is a required field.
City Enter a City to represent the city name used in the Self-Signed Certificate. By
default, the City name is San Jose. This is a required field.
Organization Define an Organization for the organization used in the Self-Signed Certificate. By
default, it is Motorola, Inc. The user is allowed to modify the Organization name.
This is a required field.
Organization Unit Enter an Org. Unit for the name of the organization unit used in the Self-Signed
Certificate. By default, it is Wireless Switch Division. This is a required field.
checkbox to enable the new self signed certificate configured as a
radio button to manually enter the values of a unique
Switch Security
checkbox to create a certificate
6-89