Motorola RFS Series Reference Manual page 156
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
4-68 Motorola RF Switch System Reference Guide
4.5.4.1 Adding an Include List to a WLAN
To add a device to a WLAN's include list configuration:
1. Select
Network
2. Select the
NAC Include
3. Click on the
4. Enter the name of the device to include for NAC authentication.
5. Refer to the
any "SET/GET" operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
6. Click
OK
to save the new configuration and close the dialog window.
7. Click
Cancel
4.5.4.2 Configuring Devices on the Include List
To add a multiple number of devices for a single device type:
1. Select
Network
2. Select the
NAC Include
3. Click on the
The
List Name
4. Enter the
Host Name
5. Enter a valid
6. Optionally, enter the
7. Refer to the
any "SET/GET" operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
>
Wireless LANs
from the main menu tree.
tab to view and configure NAC Include enabled devices.
Add
button in the
Include Lists
Status
field. It displays the current state of the requests made from the applet. Requests are
to close the dialog without committing updates to the running configuration.
>
Wireless LANs
from the main menu tree.
tab to view and configure all the NAC Include enabled devices.
Add
button within the
List Configuration
field displays the name of the device list used. This parameter is read-only.
for the device you wish to add.
MAC Address
of the device you wish to add.
MAC Mask
for the device you wish to add.
Status
field. It displays the current state of the requests made from the applet. Requests are
area.
area.
Advertisement
Table of Contents
