Ap-4131 Access Point To Access Port Conversion - Motorola RFS Series Reference Manual

2-6 Motorola RF Switch System Reference

2.5 AP-4131 Access Point to Access Port Conversion

SWITCH NOTE: AP-4131 Access Point to Access Port Conversion is only available on
the WS5100 and RFS6000 platforms.
To convert an AP-4131 "fat" Access Point to a "thin" AP-4131 Access Port you need to load the port
conversion version firmware. Refer to the files available with you Motorola Web site download package.
To convert an AP-4131 Access Point
1. Verify a TFTP server is up and running and the firmware you are going to install is in the root directory of
the TFTP server.
2. Log in to the AP-4131 as Admin. The default password is Symbol.
3. Select the AP Installation
4. From the IP Address
If the IP address was changed, you will need to reset the AP for the change to be implemented.
main menu item.
field, enter a new IP address (if required) and select Save-[F1] to save the change.