Motorola RFS Series Reference Manual page 93
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
6. Click the
Global Settings
and the domain name to be specified. For more information, see
4.2.1.1 Adding an IP Address for a DNS Server
Add an IP address for a new domain server using the
1. Click the
Add
The new
Configuration
2. Enter the
Server IP Address
3. Refer to the
Status
messages if something goes wrong in the transaction between the applet and the switch.
4. Click
OK
to use the changes to the running configuration and close the dialog.
5. Click
Cancel
4.2.1.2 Configuring Global Settings
Use the
Global Settings
Use this screen to enable/disable the
traceroute etc. using hostnames rather than IP addresses.
1. Click the
Global Settings
A
Configuration
2. Select the
Domain Look Up
domain names to IP addresses.
NOTE: The order of look up is determined by the order of the servers within
Name System
3. Enter a
Domain Name
4. Refer to the
Status
messages if something goes wrong in the transaction between the applet and the switch.
5. Click
OK
to use the changes to the running configuration and close the dialog.
button to open a screen that allows the domain lookup to be enabled/disabled
button within the Domain Network System screen.
screen displays enabling you to add IP address for the DNS Server.
to define the IP address of the new static domain name server.
field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
screen to query domain name servers to resolve domain names to IP addresses.
Domain look
button in the main Domain Network System screen.
screen displays for editing the DNS settings of the server.
checkbox to enable the switch to query domain name servers to resolve
tab. The first server queried is the first server displayed.
in the text field. This is the switch's domain.
field for the current state of the requests made from applet. This field displays error
Configuring Global Settings on page
Add
screen.
up, which allows you to use commands like ping,
4-5
Network Setup
4-5.
Domain
Advertisement
Table of Contents
