Rouge Ap Detection - Motorola WS5100 Series Migration Giude

4-12 WS5100 Series Switch Migration Guide

4.1.5.3 Rouge AP Detection

This section describes the differences in menu path navigation amongst the WS5100 1.4.x, 2.x and 3.0
baselines when using the Web UI to manage Rouge AP Detection. Rogue AP is not available in the 1.4.x
switch software
Table 4.9 Rouge AP Detection
Configuration
Option/Feature
Access Rogue AP
Detection Menu
Define Rogue AP
Detection
Method
Rogue AP Rule
Management
Add a Detected
AP to Approved
AP List
View Rogue AP
Details
1.4.x Location
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
2.x Location
System Settings >
Rogue AP Detection.
System Settings >
Rogue AP Detection
--------------------------------------
• Select amongst the RF
Scan by MU, RF Scan by
AP and RF Scan by
Detector AP checkboxes
button within Detection
Method field.
System Settings >
Rogue AP Detection
--------------------------------------
• Click Add, Delete or
Delete All from within the
Rule Management tab.
System Settings >
Rogue AP Detection
--------------------------------------
• Click the AP List tab
Select an AP and click the
Add AP to Rule List
button.
System Settings >
Rogue AP Detection
--------------------------------------
• Click the AP List tab
Select an AP and click the
View Details button.
3.0 Location
Security >
Access Point Detection
Security >
Access Point Detection
--------------------------------------
Configuration
• Select
tab.
Enable
• Select checkbox.
Allowed APs
• Select
tab.
• Click Add or Edit button.
Security >
Access Point Detection
--------------------------------------
• Select Configuration tab.
• Select Enable checkbox.
• Select Allowed APs tab.
• Click Add or Edit button.
Security >
Access Point Detection
--------------------------------------
Unapproved
• Select
APs
tab.
• Select an unapproved AP.
• Click the button.
Allow
Security >
Access Point Detection
--------------------------------------
Unapproved
• Select
APs
tab.