Motorola RFS Series Reference Manual page 262

5-22 Motorola RF Switch System Reference
2. Select the Pool Class
3. Refer to the
exist to configure a pool class.
The Address Ranges
4. Click the Edit
information, see
5. To delete an existing DHCP pool class name and its associated address range, select the pool class name
from the Pool Class Names
6. Click the Add
Class on page
5.2.9.1 Editing an Existing DHCP Pool Class
The Edit DHCP Pool Class Configuration
DHCP class name. It is also used to configure a maximum of 4 pool class address range. To revise an existing
DHCP pool class name:
1. Select Services > DHCP Server
2. Select the Pool Class
3. Click on the
4. Refer to the read-only
5. Use the Class Name
on page 5-19.
6. Refer to the
ranges can be assigned to a class.
a. Use the
b. Select a address range and click
tab to view the DHCP pool class details.
Pool Class Names field to configure a pool class. A pre configured pool and class must
section displays the address ranges associated with the pool class.
button to modify the properties displayed for an existing DHCP Pool Class Name. For more
Editing an Existing DHCP Pool Class on page
field and click the
button create a new pool class name. For more information, see
5-23.
from the main menu tree.
tab.
Edit button from the Pool Class Names
Pool Name to ensure modifications are made to the correct pool name.
field to associate an existing class, created using
Pool Class Address Range
Insert button to revise the Start IP and End IP address range for a class.
Remove
5-22.
Delete button.
dialog is used to edit the association of a DHCP pool name to a
section.
field to revise an address range. A maximum of 4 address
to delete that particular address range.
Adding a New DHCP Pool
Adding a New DHCP User Class