Motorola RFS Series Reference Manual page 205

3. Click the Smart RF Settings
4. Click the Check All Boxes
configuration window. To uncheck all boxes click this box a second time.
5. Check the Enable Smart RF Module
The remainder of the Smart RF Settings screen is divided into the following four sections:
• Calibration Configuration
• Monitoring/Recovery Configuration
• Diagnostic Configuration
• Calibration Schedule
6. The Calibration Configuration
Assign - Detector Check this box to enable automatic assignment of radio detectors.
Assign - Channel Check this box to enable automatic assignment of channels to working radios to
avoid channel overlap and avoid interference from external RF sources.
Assign - Tx Power Check this box to enable automatic assignment of transmit power.
Assign - Rescuers Check this box to enable automatic assignment of rescuers along with rescuing
power.
Available The Available box lists all available channels for Smart RF.
Configured The Configured box lists all channels enabled for Smart RF.
Add To add a channel to the configured list, select one or more channesl from the
Available box and click the Add button.
button
option in the Smart RF Global Settings dialogue to check every box in the
box to enable Smart RF functions on the switch.
section contains the following RF calibration settings:
4-117
Network Setup