Motorola RFS Series Reference Manual page 82
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
3-38 Motorola RF Switch System Reference
2. Refer to the
configuration file updates. If enabled, the located (updated) configuration file will be used with the
switch the next time the switch boots.
Enable
IP Address
User ID
File Name (With
Path)
Protocol
Password
SWITCH NOTE: In addition to the
update using USB or Compact Flash. On the RFS6000 users can also auto-update using
USB.
3. Refer to the
cluster file updates.
Enable
IP Address
User ID
File Name (With
Path)
Protocol
Password
Switch Configuration
field to enable and define the configuration for automatic
Select the
Enable
checkbox to allow an automatic configuration file update when
a newer (updated) file is detected (upon the boot of the switch) at the specified IP
address.
Define the
IP address
version is detected when the switch is booted, it is uploaded to the switch and
used upon the next boot of the switch.
Enter the
User ID
required to access the FTP or TFTP server.
Provide the complete and accurate path to the location of the configuration files
on the server. This path must be accurate to ensure the most recent file is
retrieved.
Use the
Protocol
drop-down menu to specify the
resident switch
FLASH
the default setting.
Enter the password required to access the server.
Redundancy Configuration
Select the
Enable
checkbox to allow an automatic cluster file update when a new
(updated) file is detected (upon the boot of the switch) at the specified IP address.
Define the
IP address
is detected when the switch is booted it will be uploaded to the switch and used
upon the next boot of the switch.
Enter the
User ID
required to access the FTP or TFTP server.
Provide the complete and accurate path to the location of the cluster files on the
server. This path must be accurate to ensure the most recent file is retrieved.
Use the
Protocol
drop-down menu to specify the
resident switch
FLASH
the default setting.
Enter the password required to access the server.
of the server where the configuration files reside. If a new
FTP, TFTP, HTTP, SFTP
medium used for the file update from the server. FLASH is
Protocols
listed, on the RFS7000 users can also auto-
field to enable and define the configuration for automatic
of the server where the cluster files reside. If a new version
FTP, TFTP, HTTP, SFTP
medium used for the file update from the server. FLASH is
or
or
Advertisement
Table of Contents
