Configuring Automatic Updates - Motorola RFS Series Reference Manual

Available
Formatted
4. Select CF, USB1 or USB2 and click the
switch) to check if the memory device is formatted and available. You will be prompted that proceeding
will erase all data on the disk and if you would like to proceed.

3.6 Configuring Automatic Updates

Use the Automatic Updates
the switch is booted. If updates are found since the last time the switch was booted, the updated version is
uploaded to the switch the next time the switch is booted. Enable this option for either the firmware,
configuration file or cluster configuration file. Motorola recommends leaving this setting disabled if a review
of a new file is required before it is automatically uploaded by the switch.
To enable and configure the automatic update feature for switch firmware, configuration files and cluster
configurations:
1. Select Switch >
Displays the current status of the memory resource. By default, nvram and system
are always available.
• A green check indicates the device is currently connected to the switch and is
available.
• A red X indicates the device is currently not available.
This displays the format status of the memory devices. This ensures that the
external and internal memory device store the files securely. A formatted memory
device is less prone to crash and loss of data.
• A green check mark indicates the device is currently connected to the switch
and is available.
• A red X indicates the device is currently not available.
Format
screen to enable a facility that will poll a server address (you designate) when
Automatic Updates from the main menu tree.
button (enabled only if the CF or USB are connected to the
3-37
Switch Information